Soda Blasting Log Homes Over time, weathering can cause log homes to need new staining, but you cannot do this without removing the old stain. When the exterior of a log home starts to look a little worn and faded, soda blasting is a great solution. Soda blasting is a relatively new technique for paint, […]
Soda Blasting Preferred Method In addition to cleaning areas such as oil and grease in the engine compartment of a marine application, one of the best marine applications is removing anti-fouling bottom paint from boats, both large and small. Since it is possible to take the paint off without damaging the gel-coat or fibreglass using […]
Industrial equipment cleaning & industrial equipment paint removal are both services that every company with industrial equipment needs to think about at some point in time. Whether that means that a printing press is in need of repainting or an overhead crane is in need of non-destructive inspection, soda blasting the industrial equipment can provide […]
Heavy equipment cleaning is a project that just needs to be done from time to time. The unique properties of soda blasting with real baking soda provide a perfect way to assist in the process of refurbishing heavy construction equipment. Our soda blast media will clean the heavy equipment by removing paint, grease and oil […]
Back in the day, animal fat was combined with baking soda to make a soap like paste. When combined with animal fats, petroleum-based oil or grease, baking soda emulsifies the oils through a process called saponification. This is the most effective and environmentally friendly means of cleaning oil and grease.
Graffiti is like a cancer on the side of a building. No one wants the graffiti to show up and once it appears it often spreads. The best thing to do is get the graffiti removed as quickly as possible. Until mobile sodablasters arrived, there were few good graffiti removal options. Sand blasting would tear […]
We don’t often think of engine parts as being delicate. But just a few grains of sand can score the cylinder walls, rings and bearings of an engine in an instant, add a few more and a brand-new engine can be useless in no time. Soda blast media however, will not harm the internal components […]
The advantage of using a sodablaster for automotive surface preparation is that paint, grease and undercoating can be removed without breaking the surface tension of the metal. Paint can even be taken off a layer at a time and bondo can be left in or removed depending on the blasting techniques employed.
Years of soot, oil grease, grime and just plain dirt can seep into concrete and other aggregate materials and make it look unsightly. Often times this situation can be downright dangerous. Parking lots can become slippery from oil dropped from cars and trucks. Sidewalks become matted with chewing gum and the like. It is because […]